Practical articles about profiled sheeting and metal tiles: how to choose a profile for a roof or a fence, batten spacing, colours and coatings. Written by the plant, from production experience.
- What to roof with: materials compared by mass, pitch and module
- A metal tile door canopy: the 350 mm step sets the size
- Slate or steel roofing: the comparison in numbers
- Profiled sheeting and metal tile dimensions: the full table and what each one controls
- Steel or concrete fence: where concrete wins, and why
- Metal roof noise: why thicker steel does not help
- Metal tile offcuts: what to do with them and how to avoid having any
- A profiled sheeting garage: wall calculation and why the pitch eats your headroom
- A profiled sheeting wicket gate: one sheet, no cutting, and why it sags
- Installing a profiled sheeting roof: the order of assembly and how many sheets per slope
- Painting profiled sheeting: when touch-up helps and when it does not
- Eaves flashings for metal roofing: the two pieces people confuse
- Mono-pitch roof in profiled sheeting: why the pitch barely changes the steel bill
- Cutting profiled sheeting: why an abrasive disc ruins the sheet for good
- Metal tile over old asbestos-cement roofing: when it works and on what conditions
- Profiled sheeting gates: why T10 is wrong for a leaf and how to fix it
- Balcony cladding in profiled sheeting: why a standard sheet wastes 50%
- Profiled sheeting colours: 17 RAL shades and why not every coating comes in colour
- Fixing profiled sheeting: screw length per profile and why only the bottom wave
- Profiled sheeting fence: a 30-metre calculation and when cutting to size is pointless
- Cladding a gable with profiled sheeting: the triangle calculation and why waste hits 51%
- Gazebo roof from profiled sheeting: how much sheet and why the pitch decides
- Battens for profiled sheeting: spacing per profile and how much timber it takes
- Shed from profiled sheeting: how much steel you need and how to order without offcuts
- Swedish SSAB GreenCoat steel: 20% off until 30 September
- Battens under metal tile: spacing, board sizes and installation rules
- Which profiled sheeting to choose for a fence
- Profiled sheeting or metal tile: what to choose for a roof
- Red metal tile
- Cherry metal tile